Jailbreak Iphone 4 Cdma 7.1

Before the jailbreak with Pangu, it is advisable to synchronize your gadget with iTunes.
If you are turned on with a password or PIN protection, be sure to disconnect it in the Password Settings menu.
On the device being subjected to jailbreak, go to the "Settings-Basic Date and Time" menu. Turn off the checkbox "automatically" if it is enabled.
Click on the dated time line that appears. Roll back on June 1, 2014 (or earlier).
Unpack the archive with Pangu.
Connect the gadget subjected to jailbreak to the computer.
Run Pangu utility. Click on the black button "Jailbreak" to start the jailbreak procedure. In no case disconnect the gadget from the computer until the end of the process! During the jailbreak, the device can reboot.
Carefully follow the black progress bar stylized under the smear with a brush.
When the progress bar proceeds the centerpoint, you will see the inscription "Please Tap The Pangu Icon On Your Device to Continue".
At this moment, the Pangu icon should appear on the last desktop of the iOS device.
Click on it. In the pop-up window that appears, click "Continue".
If the Pangu application has been successfully started, you will see the following screen:
Wait until the progress bar in Pangu on the computer will reach the end. The device can reboot several more times.
Jailbreak will be completed when the Cydia icon will appear after restarting the device on the last desktop.
It is advisable to connect to Wi-Fi. Then click on the Cydia icon and wait when repositories are updated.

As you know, with the release of iOS 7.1, Apple has eliminated the vulnerability allowed to do with EVASI0N7. And all who for some reason updated to iOS 7.1 temporarily lost the opportunity to perform the procedure jailbreaking iPhone.. For the owners of the iPhone 4, a pleasant news, a utility for a tied Jabreka iOS 7.1 appeared for iPhone 4. Especially relevant information for the owners of "locked" iPhone 4 with iOS 7.1 "on board".

How to make tied "Jailbreak IOS 7.1 on the iPhone 4 Read" under the cut ".

Tied jailbreak is the process of obtaining unauthorized access to file System iOS-device valid until the first restart of the device.

In other words, after the first, since this jailbreak, restart iPhone., for example, access to the file system will be completely blocked, installed hacked applications from App Store. And Cydia tweaks will stop running, the device gets into the "Eternal Apple Mode" (Black Screen with Apple logo) and not loaded in normal mode.

How to make a tied jailbreak iOS 7.1?

To execute iOS 7.1 jailbreak on the iPhone 4 we need:

iPhone 4 (models: GSM, REV.A, CDMA);
download geeksn0w - utility for a tied jailbreak iPhone 4 with 7.1 "on board";
install JDK (Java Development Kit);
establish;
install Microsoft .NET Framework;
the Internet.

It's important to know!

Up to version 7.1 must be performed. OTA update () can cause mistakes in the work of Geeksn0w;
to avoid loss of personal data before the jailbreak must be performed.

Utility called geeksn0w from @Blackgeektuto. Allows you to perform a tied jailbreak iPhone 4 (Rev.a) with installed iOS. Version 7.1.

If Geeksn0w works with only A revision Audit models, there is a need to determine the audit of the iPhone 4.

How to determine the audit of the iPhone 4?

The iPhone revision can be defined in several ways:

by the value of the "Model" field in the iPhone settings;
fCC ID value on back cover devices;
according to the Apple service identifier (indicated in the name of the original firmware file.IPSW);
using special software (RedSn0W, Geeksn0w).

IPhone 4 Rev.a identifiers:

Model: MD128, MD146, MD200, MD439, MD873, MD874, MC676, MC677, MC678, MC679, ME798, ME799;
FCC ID: BCG-E2422A, BCG-E2422B, BCG-E2380A, BCG-E2380B;
Identifier: iPhone3,2, iPhone3.3.

You can determine the audit of the iPhone 4 using Geeksn0w

Run Geeksn0w on behalf of the administrator and connect the iPhone to a computer using a USB cable (iTunes should not be running).

And click on "Detect Model". This will determine the exact model of your iPhone.

Tied jailbreak iOS 7.1 for iPhone 4 Rev.a with GEEKSN0W

In the GEEKSN0W window, click on the Jailbreak button. Geeksn0w will be accepted for business. At a certain stage of the IOS-device process will be rebooted. Do not disconnect the iPhone from the computer!

After rebooting, follow the geeksn0w instructions and enter the iPhone again in the DFU MODE, after which the process will continue. This time it will take more time, be patient.

The third and last time enter the iPhone in the DFU mode.

After full filling of the progress band and appearances in the GeekSn0W window, the "Done" letter (ready), click the "Exit" button. Finally, the iPhone can be disconnected from the computer.
Make sure that the IPhone 4 jailbreak procedure has been successful, an alternative store of Cydia apps should appear on the desktop.

If for some the reason iPhone spontaneously rebooted or turned off ("sat down" battery, software failure), or it is necessary, the jailbreak will be reset and the iPhone will fall into the "Eternal Apple Mode" (Black Screen in Apple Logo), i.e. In normal mode, the device will not load regular methods.

To "not lose" jailbreak iOS 7.1 you need:

do not reboot iOS-device;
follow the level of charge battery iPhone, iPod Touch and iPad and not to give it completely discharged;
after each reboot, execute the "Tethered Boot" procedure (loading in a tied mode).

If the iPhone "hung" or the program failure that requires it that requires its reboot, and perform "Tethered Boot" is not possible, after the iPhone restart, download in normal mode standard methods will not work. The adjacent load mode will allow you to download the iPhone in normal mode and restore Cydia's performance, all hacked applications and tweaks.

Download iPhone in "Tethered Boot" (tied mode)

Connect the iPhone to the computer using a USB cable.
Enter it in the firmware update mode (DFU MODE).
In the GEEKSN0W window, click on the button with your iPhone model (iPhone 4 GSM, iPhone 4 Rev.a, iPhone 4 CDMA). After the full reboot of the iOS device, it will be launched in the "Tethered Boot" mode and the performance of Cydia, all tweaks and hacked programs will be restored.

That's all, after the fulfillment of all necessary operations at your disposal, you will receive a jailbroken iPhone 4 Rev.a with IOS 7.1 installed.

If in the process of jailbreak or loading in a tied mode, you have problems or errors, write to us in the comments, we will try to help you.

The release of firmware update to iOS 7.1.2 was expected before WWDC 2014, after problems with the security of Mail attachments were detected. However, the output of iOS 7.1.2 was delayed, and only today an update was represented by Apple. However, nothing new in itself carries. In addition to correcting the Mail Security Problem, users will enhance the connectedness and stability of IBEACON, as well as the disposal of the error with the transfer of data to the accessories of third-party manufacturers. Good news In the fact that you can already make Jailbreak iOS 7.1.2.

Unattended Jailbreak Pangu is fully compatible with the iOS 7.1.2 update today. We checked, everything works! Actually, the information that no problems should have appeared before. I wrote all the same IH8Sn0W, who doubted that Apple would close in iOS 7.1.2 used for jailbreak vulnerability. The team of Hackers Pangu made the English-speaking version of the utility and removed the Chinese version of the Application Store.

How to make jailbreak iOS 7.1.2

You can get acquainted with more detailed 7.1-7.1.x, which was published earlier.

That's all! Jail made! So Pro-X will work with recording telephone conversations ... 🙂

The first new one in the Apple mobile platform line over the past two months. Since the work on the update was completed after the utility came out, this version Applications jailbreak iOS 7.1.2 "out of the box."

IN update iOS. 7.1.2 There are only corrections of bugs and improve in the security system. In particular, Apple has corrected an error in the email attachment encryption system and corrected a failure of data transfer to third-party accessories. Updates were also made to the iBeacon application. Since Pangu 1.1 natively supports iOS 7.1.2, for users previous versions OS has a sense to upgrade to new version Systems and repeat jailbreak.

Pangu 1.1 is available for computers on Windows and Mac. This tool is compatible with all versions of Apple gadgets under the start of iOS 7.1.2, 7.1.1, 7.1. The hacking procedure does not cause any difficulties. The process takes up to 5 minutes, after which the Cydia icon appears on the device. Before continuing, the creators of the exploit are recommended to make backup content iPhone and iPad.

How to make iOS 7.1.2 jailbreak using Pangu for Windows and Mac:

Step 1: Make sure you updated the device on last version OS (iOS 7.1.2, 7.1.1 or 7.1).

Step 2.: Download Pangu 1.1 for Mac or Windows and open the program.

Step 3.: Connect the iPhone or iPad to iOS 7.1.2 to the computer. The program will determine the model of your device and if it is suitable, the Jailbreak button will be active in the application window.

Step 4.: Click Jailbreak. The utility will demonstrate a pop-up window with instructions on how to change the date on your iPhone or iPad.

Step 5.: You need to go to the main -\u003e Date and time section on the iOS device, translate the toggle switch automatic setting Time to Off. And set the date on June 2, 2014, 8:00.

Return to main screen Systems. On the desktop iPhone or iPad under iOS 7.1.2, the Pangu application icon should appear.

Step 6.: Press the Pangu icon on the iOS device, the application logo will start the entire screen.

Step 7.: Pangu will continue jailbreak, after which the iPhone or iPad will reboot.

Step 8.: Do not disconnect the gadget from the PC. Jailbreak will continue, the device will reboot the second time.

Now instead of the Pangu pictogram on the screen of your i-device you will see the Cydia icon.

Pangu Jailbreak: In this Tutorial of iOS, You Will Get to Learn All About Pangu? Pangu Jailbreaks iOS 7, iOS 8, iOS 9.3.3, iOS 9.2.1 and iOS 10 AS WELL. Pangu is an iOS appused for iPhone / iPad Jailbreaking. Please read the article Till The End to Know More about Pangu and Its Jailbreaking IOS Downloads.

Pangu Jailbreak 2019.

About Pangu?

Pangu Is An. iOS Jailbreaking Tool, Pangu Refers to the Jailbreak Software Developed and Released by Panguteam. The Group Created Pangu to Jailbreak iOS 7.1.x using their Own Exploits and Instruction from Long-Time Jailbreak Developer @ I0N1C (Stefan Esser). The Name Pangu (Or Pan Gu) comes from chinese mythology.

What is Jailbreaking?

iOS 9.3.3, iOS 10.3.3 Jailbreaking Using Pangu : iOS Jailbreaking IS The Process of Removing Software Restrictions Imposed by iOS, Apple's Operating System, On Devices Running It Through The Use of Software Exploits; Devices Include The iPhone, iPod Touch., iPad, and Second-Generation Apple TV. Permits root access to the iOS File system and. Manager, Allowing The Download of Additional Applications, Extensions, And Themes That Are Unavailable Through the Official Apple App Store.

Pangu Jailbreak Team Has Recently Released The Jailbreak for iOS 7,8,9.2.1, 9.3.3 - IOS 9.2, iOS 10 and iOS 11 in June 2017. Pangu's iOS 9.3.3. From, You can download Pangu Jailbreak Tools for your ios Device At Free of Cost. "Download Pangu. Jailbreak ios."

Download Pangu Jailbreak iOS 9.2 - iOS 9.3.3 (Free)

if your ios Devices Like iPhone or iPad Are Working On and Above iOS 9.2 to iOS 9.3.3 Then You Can Download This Version of Pangu to Jailbreak Your Device.

Download Pangu Jailbreak 1.1 for iOS 9.2 - iOS 9.3.3

Download Pangu Jailbreak for iOS 8 - IOS 8.1 FREE LINK:

Right Now, if you are using your ios Devices on iOS 8 or Above iOS 8 to iOS 8.1 Then You Can Download Pangu App for Jailbreaking from Below Links AT Free of Cost.

Jailbreak Iphone 4 Cdma 7.1

Source: https://newtravelers.ru/en/setting/chto-takoe-dzheilbreik-ios-7.html